Turning off PC case lights is a simple process, and it can be done in several ways. If you’re experiencing trouble in sleeping due to your computer’s bright light or you’re just tired of the extra light coming from the PC case, you can quickly turn off the case lights by following these simple steps.
Method 1: Using the Physical Button
Most modern PC cases come with a physical button that can turn off the case lights. Look for the button on the front or back of the case. The button may have a lightbulb icon, which indicates that it controls the case lights. Follow the steps below to turn off the PC case lights using the physical button.
- Locate the physical button: As mentioned earlier, the physical button is usually located on the front or back of the case. If you’re not sure where it is, check the user manual that came with your PC case.
- Press the button: Once you locate the button, press it to turn off the case lights. If the button has different settings, press it repeatedly until you turn off the lights.
- Turn the lights back on: To turn the lights back on, press the button again. If the button has multiple settings, keep pressing it until you get the desired lighting effect.
Method 2: Using the BIOS
Another way to turn off the PC case lights is through the BIOS. The BIOS is a built-in software that controls various hardware components in your computer. Follow the steps below to turn off the case lights through the BIOS.
- Restart your computer: To access the BIOS, you need to restart your computer. Click on the Windows Start button and select Restart.
- Access the BIOS: As the computer restarts, press the appropriate key to access the BIOS. The key may vary depending on the motherboard manufacturer. Look for a message that says “Press [key] to enter setup” or “Press [key] to access BIOS.” Some common keys are F2, F10, DEL, and ESC.
- Locate the lighting settings: Once you’re in the BIOS, look for the lighting settings. Depending on the motherboard manufacturer, the lighting settings may be located under the “Advanced” or “Peripherals” tab.
- Disable the lighting: Once you locate the lighting settings, disable the lighting by selecting “Off” or “Disable.” If the motherboard has multiple lighting zones, disable each one separately.
- Save the changes: After disabling the lighting, save the changes by pressing F10 or following the on-screen instructions. The computer will restart, and the case lights will be turned off.
Method 3: Using Third-Party Software
If your computer has RGB lighting or other fancy lighting effects, you may need third-party software to control the lights. The software may come with your motherboard, graphics card, or other hardware components. Follow the steps below to turn off the case lights using third-party software.
- Install the software: If you haven’t installed the software yet, download it from the manufacturer’s website and install it on your computer.
- Open the software: Open the software and locate the lighting settings. Depending on the software, the lighting settings may be located under the “Settings,” “Advanced,” or “Lighting” tab.
- Disable the lighting: Once you locate the lighting settings, disable the lighting by selecting “Off” or “Disable.” If the software has multiple lighting zones, disable each one separately.
- Save the changes: After disabling the lighting, save the changes by clicking on “Apply” or “Save.” The case lights will be turned off.
Turning off the PC case lights is a simple process, and it can be done using the physical button, the BIOS, or third-party software.
