You need to install a new hard drive (HDD or SSD) or else your computer won’t start. At startup, you might have even encountered the “Boot Device Not Found” warning. The disc drive isn’t mentioned on the boot priority menu, which you discovered when you entered the BIOS to investigate the problem. Let us know the cause for ‘Not Showing Up In Boot Priority Windows 10’ and know how to fix it.
To launch the OS, all computers utilize a boot device. A boot Priority Windows 10 is a hardware that like hard disk, USB that helps to start your PC. If your drive is not recognized, it can be because System Setup has turned it OFF.
Does it”Boot Device Not Found”?
To launch the OS, all computers utilize a boot device. A boot priority windows 10 is a storage disc that tells your computer’s BIOS and motherboard that it is a bootable storage device, such as a hard disc drive (HDD), solid-state drive (SSD), USB, and others.
On your motherboard, all of the storage devices that are attached to your computer are listed in a prioritized boot order. The system will start from the first device that declares itself to be a bootable device. Because the MBR is where the operating system should start, it then launches Windows.
The hard drive’s absence from the boot priority list has the following causes:
BIOS doesn’t enable the hard disc
Sometimes a computer’s BIOS can be altered to turn off the hard drive. An unidentified boot device may result from a disabled hard drive. As a result, the hard drive is not listed..
The hard drive might only be recognized if it uses an updated driver. Therefore, it won’t show up in the boot priority.
SATA cable damage or disconnect
A hard drive and a computer’s motherboard are connected by a SATA cable which requires power supply. Consequently, a distinct cable connects the hard drive with the power supply. If one of the wires is damaged or comes loose, the system won’t be able to find the hard drive. Therefore, the hard disc will not appear in the boot priority regardless of your OS.
A failed hard drive
If the hard disc fails, it wont be recognized. Hard disc failure is as easy to fix as it seems. Several factors, such as physical harm to the burned controller ship, spinning disc, high voltage, etc., can cause a hard drive to malfunction.
Damaged MBR Partitioning Scheme
An application named Master Boot Record is present in each partition on the disc (MBR). It organizes data of each division;s size and other details.
Hard Drive Not Appearing in Boot Priority Windows 10(Causes, Fixes)
1. Check the USB attachment and cord
When a hard drive is not recognized by your PC, usually check whether it is connected properly or not. Your computer’s disc drive is connected to it by two cords.
The device is connected to the motherboard using the first SATA cable, and the power supply unit, from which it draws its power, is reached by the second SATA cable.
The system won’t identify the storage device if one of these cables was improperly inserted or if it has become loose over time.
2. Perform a full PC reset
Your computer might merely require a hard reset to reestablish the link between the BIOS and the hard disc.
To execute a hard reset, adhere to these steps:
- OFFSET your computer.
- Disconnect the power cable.
- Press and hold the power button for roughly 20 seconds to use up the system’s remaining electricity.
- Press the power button once more, release it, and connect the power wire back in.
- Windows should generally start at this time.
3. Switch the USB Port On in BIOS
Some motherboard makers utilize the BIOS to disable any unused ports automatically. It’s possible that the port you’re connecting your hard disc to isn’t functional.You must enter the BIOS to check its status and make changes:
- Use the keyboard arrow keys to choose Advanced after entering the BIOS during boot time.
- Now choose Integrated Peripherals or Onboard Devices from the menu.
- To set the settings to Enabled, select the USB Controller option and then hit + or -.
- To enable the USB ports, press the F10 key.
- After leaving the BIOS, restart the computer.
4. Reinstall or update disc drive drivers
If Windows starts up without any issues, yet BIOS detects one of your hard discs, the case may be brought on by old or damaged drives.
Here’s how to use the tools included in Windows to update or replace the storage drive’s drivers:
- Select Device Manager from the list by performing right-clicking on the Start button.
- Locate the Disk Drives category and expand its options with a right click.
- Right-click on the hard drive’s name after locating it.
- Update Device can be selected from the drop-down menu.
- In the pop-up, select the option to automatically check for new driver.
- Once update completes, restart your computer.
- If the problem persists, return to the Device Manager and select Uninstall from the drop-down selection this time.
- Windows will automatically install the most recent drivers after a system restart.
Remark: If the name of the complicated disc device has a yellow exclamation point next to it, right-click on it, choose Properties, choose the General tab, and then choose Troubleshoot.
To fix the problem that Windows has identified, adhere to the directions.Thid-party apps are also useful to quickly replace outdated or missing drivers. The Bit Driver Updater is a good choice for automatic driver upgrades. You may download, install, and upgrade all of your drives, including your disc drives.
- Launch the Bit Driver Updater program after downloading it.
- Press the Driver Scan button.
- Select the Update Now button next to the hard disc drive when you locate it in the list.
- Select update all option, to update all of your drivers whether missing or outdated.
- Please restart your computer after the driver has completed its automatic installation.
Another helpful program that can identify problematic drivers and instantly install their most recent versions is Driver Easy.
- Download, install, and then start Driver Easy.
- Click the “Scan Now” option on the menu.
- Click Update after locating the flagged hard disc driver in the list.
- You can update all of your faulty drivers by selecting the Update All button if you purchase the Pro edition of the software.
5. Set up the hard drive
If a drive or partition is missing from the File Explorer list, it is commonly uninitialized.
Hard drives that have not been initialized are not detectable by BIOS and cannot be used to store data.
A new hard drive typically experiences this; if the disc lacks a legitimate signature, it cannot be properly registered with the system.
- AOMEI Partition Assistant Standard is a free software that helps to initialize the hard disc.
- Download, set up, and run the AOMEI Partition Assistant Standard.
- When you right-click the hard disc you initialize, choose Initialize Disk.
- The divider style is the next thing you must choose. GPT should be used in favor of something other than MBR.
- Once the new drive has been initialized, you.
Using a Windows-compatible file system, such as FAT32, NTFS, or ex FAT, you can create a new partition on the free space after the new disc has been initialized. The likelihood of BIOS now showing your hard disc in the boot priority list is increased.
6. Update BIOS
The hard drive not being detected issue can occasionally be resolved by changing the BIOS. The BIOS may be updated in three different methods, and you can find the instructions here:
(Before you begin, make sure you have power backup while updating the BIOS because the BIOS might become corrupted if the computer shuts off during the procedure.)
Performing a manual BIOS update
- You must first go to the manufacturer’s official website for your motherboard.
- To locate your product, use the name, service tag, or serial number.
- If multiple files are listed in the BIOS section, choose the most recent one.
- The file, typically in.exe format, can be downloaded and saved.
- When you double-click the file, your computer will restart, and a BIOS update screen will appear.
- Complete the Update by following the instructions.
- Remember that this procedure can differ significantly from one manufacturer to the next.
Using a bootable USB, update the BIOS
If your machine doesn’t boot Priority Windows 10, you can finish the upgrade by saving the BIOS.exe file to a USB flash drive.
- Visit manufacturer’s website and download the BIOS update file.
- Save it to a USB flash drive using a working system.
- Connect the USB to the computer whose BIOS has to be updated.
- To restart the computer, use the F12 key.
- Choose Return after choosing the USB device from the menu.
- Follow the on-screen directions to finish the upgrade procedure after the system displays a command prompt.
7. Change your hard drive, then reinstall Windows
If none of those above fixes have worked, your hard disc is likely broken. If it still has a warranty, you can take it to a repair center or get a free fix. Most likely, a hard drive will never again operate flawlessly. To get your PC back to working, install Windows onto new and latest version of hard drive.
Your SSD may be listed outside the BIOS startup priority for several reasons. They could be problems with your BIOS configurations or SATA driver problems. The fixes involve keeping your driver updated and setting up the SSD settings in the BIOS.
- Why won’t my HDD appear after inserting an SSD?
If the disc is listed in your device manager, you must go to Control Panel > Administrative Tools > Computer Management > Disk Management. Check to see if your disc is “Healthy Active Primary Partition” and not “Unallocated” by finding it. Activate, format it, or make it active if it says “Unallocated.”
- Why doesn’t my hard disc appear when I install Windows 10?
On RAID discs, Windows 10 installs frequently fail to detect the hard drive. To resolve the problem in this instance, manually load the RAID drivers.