There’s nothing worse than trying to watch your favorite show or play the latest video game and having a jittery screen makes it impossible to see what’s going on. If you’ve recently started experiencing this issue with your Virgin Media router, you may be looking to fix your jitter issue as quickly as possible. Thankfully, there are plenty of different ways to solve your jitter problem without spending any money – let’s take a look at some of them! Let us know “Virgin Media Router Jitter”
Virgin Media Router Jitter
The first thing you can do is to ensure your Wireless network is switched on. If it isn’t, turn it on and walk around the house. If there are still issues with your connection, try putting your router in a new location. This will assist in increasing the strength of the router. For example, if you had two routers in different rooms and the signal was weak when both routers were next to each other, then move one router out into another room.
1) Check your internet connection
The number one is to examine your browsing configuration. If you have a strong connection, there is every possibility that the router may have a problem. Try resetting your router and check if the issue still persists. Alternatively, try a different device and check whether it has the same problem. If not, then there might be a problem with your network provider. Initially, ensure that your other devices are running as they should. If they’re working fine on other networks but not on yours, this means that something is wrong with your network configuration. Check your wireless security: Make sure you’re using WPA2 encryption on both the router and any devices connected to it – this will prevent hackers from intercepting data sent over the network. Connect wired: It may also be worth connecting all of your devices wirelessly for one night and seeing how it goes – just to rule out wireless interference as a possible cause of jittery connections. Firmware update: Check for any firmware updates available for your router – these can help fix bugs and make sure everything runs smoothly.
2) Upgrade your router’s firmware
Secondly, you may as well update your router’s firmware.
This will help the router communicate with your devices more effectively, which will often solve the jitter problem. For this to be done, you will have to enter into your router’s settings and find the Administration tab. After that, clink on Router Upgrade by following the guidelines written on the screen. You should also read the update notes before upgrading as it could mention new features or problems that have been solved. In case you couldn’t meet up with the upgrading for some reason, contact Virgin Media customer services for help. 1) Upgrading your router’s firmware: The first thing you can do is upgrading your router’s firmware.This will help the router communicate with your devices more effectively, which will often solve the jitter problem.To do this,you will have to enter into the router’s settings and find the Administration tab.Then clink Router Upgrade by following the guidelines on screen.You should also read the update notes before upgrading as it could mention new features or problems that have been solved.In case you couldn’t meet up with the updating for some reason,contact Virgin Media customer services for help.
3) Change your router’s channel
Thirdly, you need to open up your wireless settings page on your computer. You can find this by writing wireless settings into Google and clinking on the apex outcome. Once you’re at the wireless setting page, click on the button that says Advanced Settings. In this menu, you’ll want to go ahead and click on Wireless Network Mode and then select Manual. Next, go back up a level to where it says Primary Network Type and choose 2.4 Ghz only (b/g only). Now scroll down just a bit more until you see an option called Channel. Click on that and change it from Auto or whatever it may currently be set as, to 1. Save these settings and reboot your router. If after these changes you still notice some jitter, try changing the channel again to 3. If neither of those two channels work for you, try 4 or 11 instead.
4) Reduce interference from other devices
There are a few ways that you can reduce interference from other devices, and the first one is the easiest. You can find out if there is any other nearby devices that may be using the same frequency as your router by going through all of the channels on your router and checking for activity. If there is activity on a channel, then move your router onto that channel. Another way to reduce interference from other devices is to use a router with 3 antennas, which will help you get stronger signals. Lastly, you can try moving your router closer to where it needs to be so that it has better reception, or change its location altogether. Additionally, ensure you have proper clearance around your device. A space without anything interfering in the range is best for good reception.
5) Move your router to a central location
One of the most common reasons for poor WiFi connections is having the router too far away from your devices. This can lead to interference and a weaker signal, which will result in slower connections and more frequent drop-offs. To alleviate this problem, move your router closer to where you use your device most often (e.g. if you use it mostly in the kitchen, place it somewhere near that area). If there are a lot of obstacles between the router and where you spend most of your time, try moving the router higher up so that it has a clearer path to reach your phone or laptop. You can also look into placing an antenna on the roof if there are no trees or other obstructions blocking its view or you can purchase an extension cable for some extra length.
6) Optimize your WiFi network
If you’re searching for an easy remedy, one of the easiest things you can do is check your WiFi signal strength. If it’s not strong enough, try to move your router to a preferred destination. Next, check that your power cable is securely plugged into the wall socket and that there are no other appliances or cables blocking the signal. Finally, make sure that both of your WiFi devices are connected to the same network by checking their settings and selecting the same network name from each device.
7) Disable Virgin Media Hub’s Smart WiFi
If you want to keep the Smart WiFi features, but decrease your router’s jitting, there are a few steps you can take. The first step is disabling the Smart WiFi function. In order for this fix to work, you need to disable the Hub and not just turn off the device (or remove it from the network). Next, try adjusting your wireless channel by using a tool like Wi-Fi Analyzer or NetSpot App. You may have better luck with a different channel and will experience less interference with other networks. Lastly, if that doesn’t work then try resetting your router back to factory settings and reconfiguring it again after everything is set up.
8) Restart your router
If you have a jittery connection on your device, there are some actions that can be taken which will be of help. The first thing you should do is reboot the router by disconnecting it and reconnecting it back in. If this doesn’t help, try powering off all the devices on your network and restarting them one by one until the problem goes away. It could be that there is too much wireless interference, or another device on the network is causing problems with yours. If these steps don’t work, contact Virgin Media customer service for additional assistance.
9) Contact Virgin Media support
The first thing you want to do is contact Virgin Media support. Try calling them, emailing them or chatting with them online. They will likely ask for your account ID and address, so have that ready before you call or email. The person on the other end of the line should be able to help fix your issue quickly and efficiently.
10) Try a different router
Virgin media routers are notoriously jittery and slow. To fix this, simply follow these steps:
1) Turn off your router. 2) Wait for 10-15 seconds. 3) Turn on the router again. 4) Wait for the router to fully start up and connect to the internet (at least a minute). 5) Unplug it from the power outlet and wait another minute. 6) Plug it back in 7) Try reconnecting your devices one by one (TV first, then phone, then tablet, etc.). 8) If the issue still persists with the device after plugging it back in, try resetting it.
Conclusion
It is also important to reboot your router and modem every once in a while, as this will help reduce any latency that might be occurring. This is easy enough to do, just unplug the power cord from the modem and plug it back in after five minutes. If you are still experiencing issues with latency, try unplugging your router from the wall outlet for 15 seconds and then plugging it back into the wall.
