In this post, we will help you to choose the Best Motherboard For Ryzen 3 2200G. The Ryzen 3 2200G made its debut in the desktop processor market way back in 2018. It’s based on first-gen 14nm Zen architecture, and also the first mainstream Ryzen APU to come with Vega 8 graphics onboard. It finally gave budget PC builders the option to play popular games without a discrete graphics card in their system.
Now Intel’s chips did offer integrated graphics for a long time, but they weren’t capable enough to run newer games at modest framerates. AMD’s superiority in the graphics department allowed them to fit fairly powerful Vega graphics in a low-cost, 65W processor, which offered not only four cores and four threads but also an unlocked multiplier for overclocking on supported motherboards.
At that time, the similarly-priced Core i3 8100 from Intel offered the same core configuration but without capable onboard graphics and a locked multiplier, making the Ryzen 3 2200G a more attractive choice in the budget zone.
Fast forward to the present, PC gaming has become a lot more expensive thanks to silicon shortage, and the Ryzen 3 2200G is one of the only quad-core APUs for new PC builders on a very limited budget. Chances are you also plan to build a system around the same processor, which is why you are looking for a motherboard to pair with it.
However, if you aren’t sure which AM4 motherboard to buy, we will help you find the best motherboard for Ryzen 3 2200G in this guide. Make sure to keep reading till the end as we will also answer a few basic questions and assist you to narrow down your buying options.
Best AM4 Motherboard for Ryzen 3 2200G
Similar to Intel, AMD offers multiple motherboard chipset options at different price points, starting with the entry-level A-series to the mid-range B-series to the highest-end X-series. While that leaves you with an ocean of choices, it can get quite intimidating if you don’t exactly know what features to look out for. We are here to help you with that.
Before you check out our picks for the best motherboard for Ryzen 3 2200G, remember that we have adjusted our list to accommodate for slight changes in price and stock levels.
1. MSI B450 Tomahawk Max
- Form Factor: ATX
- Memory Support: 4 x DIMM @ DDR4-4133, up to 128 GB
- PCIe Expansion: 1 x PCIe 3.0 x16, 1 x PCIe 2.0 x16, 3 x PCI 2.0 x1
- Storage: 1 x M.2, 6 x SATA III (up to 6 Gbps)
- Networking: Gigabit LAN
- Rear USB Ports: 1 x USB 3.2 Gen 2 Type-C, 1 x USB 3.2 Gen 2, 2 x USB 3.2 Gen 1, 2 x USB 2.0
The MSI B450 Tomahawk Max is one of the best AM4 motherboards with a B450 chipset. It’s an affordable board with the essential features most people care about. If you don’t care about more USB ports, more M.2 slots, or RGB lighting, the B450 Tomahawk is an ideal choice to pair with your Ryzen 3 2200G.
The 4+2 phase VRM configuration might seem low by today’s standards, but it’s more than capable to run the Ryzen 3 2200G at its maximum stock clock potential. Sure the VRM can get a bit hot if you plan to overclock the APU to squeeze a bit more performance, but in other situations, the B450 Tomahawk Max should deliver.
As for the specs, this motherboard has a single M.2 slot (PCIe 3.0) along with six SATA III ports. It also supports DDR4 memory up to 4133 MHz, which is neat if you plan to get high-speed RAM for your Ryzen 3 APU to get better graphics performance.
Expansion slots on the B450 Tomahawk Max include a full-fledged PCIe 3.0 x16 slot for adding a discrete GPU. The Rear I/O consists of Gigabit LAN, four USB 3.2 ports, two USB 2,0 ports, DVI, HDMI, and onboard audio ports. It even has a Flash BIOS button that allows users to flash new BIOS update from a USB drive without installing CPU, memory, or graphics card.
All in all, the MSI B450 Tomahawk Max is an excellent board for the money. While MSI no longer manufactures the board, you can still find it at a cheaper price in offline and online markets. As for alternatives, check out the below options in this list.
|Provides various expandability and upgradability options||Aging ALC892 audio codec|
|Supports CPU overclocking and memory XMP||VRM could be better|
|Well-designed BIOS menu|
2. ASRock Fata1ty B450 Gaming-ITX/ac
- Form Factor: Mini-ITX
- Memory Support: 2 x DIMM @ DDR4-3466, up to 64 GB
- PCIe Expansion: 1 x PCIe 3.0 x16
- Storage: 1 x Ultra M.2, 4 x SATA III (up to 6 Gbps)
- Networking: Intel Gigabit LAN, Intel 802.11ac Wi-Fi, Bluetooth 4.2
- Rear USB Ports: 2 x USB 3.1 Gen 2 (Type-A+C), 2 x USB 3.1 Gen 1, 2 x USB 2.0
If you are building a small form-factor PC featuring a Ryzen APU, the Fata1ty B450 Gaming-ITX/ac from ASRock is the best motherboard to go with. Despite its ITX size, the board features all the essentials that you would find on a bigger unit.
AMD’s B450 chipset is the perfect choice for these types of motherboards, giving you not only a full PCIe 3.0 x16 slot for discrete graphics but also a four-lane M.2 NVMe slot on the board’s underside for super-fast storage. Its eight-phase (6+2) VRM layout also opens up opportunities for CPU overclocking, allowing you to push your Ryzen 3 2200G APU a bit further to gain more frames in games.
However, the smaller area of the motherboard also means you only get two DIMM slots. Fortunately, it still supports dual-channel memory configuration, and you can overclock your memory up to 3466 MHz to improve the APU’s graphics performance.
While the Fata1ty B450 Gaming-ITX/ac works with limited space, the Rear I/O is sparsely populated with two USB 3.1 Gen 1, two USB 3.1 Gen 2 (Type-A and Type-C), Gigabit LAN, two Wi-Fi antenna jacks, HDMI 2.0, DisplayPort 1.2, and digital optical audio ports. You also get two additional USB 2.0 ports at the top of the rear I/O for mouse and keyboard, along with a single PS/2 port for legacy peripherals. There’s also a variety of internal connectors for storage, fans, LEDs, and front USB ports.
Additional features of this motherboard include an easy-to-browse UEFI and support for ASRock Polychrome RGB. Apart from a few form factor-related shortcomings, the ASRock Fata1ty B450 Gaming-ITX/ac is an excellent AM4 motherboard that makes good use of the B450 chipset’s features, including overclocking.
|It offers excellent CPU and DRAM overclocking||Limited memory and storage upgradability options due to smaller form factor|
|Supports up to Ryzen 5000-series processors (requires BIOS update)||Not enough USB ports for power users|
|On-board 802.11ac Wi-Fi|
3. MSI X470 Gaming Plus Max
- Form Factor: ATX
- Memory Support: 4 x DIMM @ DDR4-3866, up to 128 GB
- PCIe Expansion: 2 x PCIe 3.0 x16, 1x PCIe 2.0 x 16, 3x PCIe 2.0 x1
- Storage: 2 x M.2, 6 x SATA III (up to 6 Gbps)
- Networking: Gigabit LAN
- Rear USB Ports: 2 x USB 3.2 Gen 2, 4 x USB 3.2 Gen 1, 2 x USB 2.0
The X470-chipset motherboards are a bit overkill for an entry-level APU like the Ryzen 3 2200G. However, the X470 Gaming Plus Max from MSI can be found for a price similar to a decent B450 motherboard. Despite its lower price, it doesn’t sacrifice too much on quality.
This entry-level X470 “gaming” motherboard covers all the essentials, including four RAM slots, two M.2 slots for storage, as well as dual PCI Express 3.0 and single PCI Express 2.0 x16 slot that supports 3-way AMD CrossFire, which is great if you are into multi-GPU setups.
Of course, it also works flawlessly with Raven Ridge APUs like the Ryzen 3 2200G. For those who plan to upgrade in the future, the X470 Gaming Plus Max is one BIOS upgrade away from being compatible with a 5000-series Ryzen processor.
So far, this board doesn’t appear to take any cost-cutting measures. Where it does skimp on is the VRM, which is only an 8-phase arrangement running in a 4+2 configuration. It’s something that MSI doesn’t explicitly advertise on their product page.
Still, this should be more than enough to get a good overclock on an R3 2200G APU. The VRMs get a little toasty under maximum load, but the pre-installed heatsink keeps it relatively cool. Memory support is very good out of the box and you can expect to run dual-channel DIMMs at their manufacturer-rated speeds.
In terms of I/O, a total of six USB 3.2 Type-A ports, two additional USB 2.0 ports, and a legacy PS/2 combo port make up the bulk of the X470 Gaming Max Plus’s rear panel. Other ports include a pair of HDMI 2.0 and DVI-D video outputs, a single Gigabit LAN port, five 3.5 mm gold-plated audio jacks, and a single S/PDIF optical audio out port. Unlike the previous two boards on this list, it doesn’t have a Type-C USB port.
If you like RGB, you would be happy to hear that the X470 Gaming Plus Max has eight customizable LEDs arranged in a straight line underneath the right-hand side of the board. In addition, there are two 12V RGB LED strip connectors that work with MSI’s Mystic Light app.
Overall, this is the most budget-friendly X470 motherboard you can buy to use with your Ryzen 3 2200G APU. While MSI did shave off a few things and used slightly lesser quality hardware, it still is a surprisingly good value for the price point it currently sits at.
|A formidable choice for budget PC builders||Mediocre VRM configuration|
|Top PCIe 3.0 x16 slot is reinforced||Only one of the two M.2 slots is rated for PCIe 3.0 x4 speeds|
|Integrated RGB lighting with support for MSI Mystic Light||Missing a USB Type-C port|
|Works with up to AMD Ryzen 5000-series CPUs||Old Realtek ALC892 audio codec|
4. Gigabyte GA-A320M-S2H
- Form Factor: Micro-ATX
- Memory Support: 2 x DIMM @ DDR4-3200, up to 64 GB
- PCIe Expansion: 1 x PCIe 3.0 x16, 2 x PCIe 2.0 x1
- Storage: 1 x M.2, 4 x SATA III (up to 6 Gbps)
- Networking: Gigabit Ethernet
- Rear USB Ports: 4 x USB 3.1 Gen 1, 2 x USB 2.0/1.1
If you are on a tighter budget and don’t care about overclocking, then the silly-named Gigabyte GA-A320M-S2H might be exactly what you need. Luckily for you, it’s a pretty decent motherboard that can more or less do everything a higher-priced board can.
This particular AM4 motherboard comes with only two memory slots, which run in a dual-channel configuration and supports up to 3200 MHz frequency. For an entry-level APU like the Ryzen 3 2200G, we highly recommend getting a fast, dual-channel memory kit to get the best out of the Vega 8 graphics units; since overclocking the processor itself isn’t an option.
And because there’s no OC support, the basic, heatsink-less VRM configuration should adequately feed the APU with enough power and keep it running at its maximum stock clock frequency. Memory on the other hand can still be easily overclocked from the BIOS.
When it comes to connectivity, the A320M-S2H has all the ports you would expect from a low-end motherboard. This includes four USB 3.1 ports, two USB 2.0/1.1 ports, a pair of PS/2 ports for legacy keyboard and mouse, a single RJ-45 Gigabit LAN port, and three color-coded 3.5mm audio jacks for audio output and mic input. Video output options include HDMI, DVI-D, and D-Sub ports.
Surprisingly, Gigabyte didn’t choose to omit the M.2 slot on the board, so you should be able to upgrade to faster storage in the future. It takes both SATA and NVMe drives, at least when using an AMD Ryzen and not an Athlon-series processor.
In the end, the Gigabyte GA-A320M-S2H has it where it counts and should serve you well in a cheap gaming PC. Sure there’s no CPU overclocking support, but that’s something that low-end boards often sacrifice.
|Good value for money||No room for future memory expansion|
|Retains M.2 expansion unlike other A320 boards||Doesn’t offer CPU overclocking|
|Gigabyte’s UEFI BIOS is easy to use|
5. Asus TUF Gaming B450M-Plus II
- Form Factor: Micro-ATX
- Memory Support: 4 x DIMM @ DDR4-4400, up to 128 GB
- PCIe Expansion: 1 x PCIe 3.0 x16, PCIe 2.0 x16, 1 x PCIe 2.0 x1
- Storage: 1 x M.2, 6 x SATA III (up to 6 Gbps)
- Networking: Gigabit LAN
- Rear USB Ports: 1 x USB 3.2 Gen 2, 2 x USB 3.2 Gen 1, 1 x USB 3.2 Gen 1 Type-C, 2 x USB 2.0
The Asus TUF Gaming B450M-Plus II is a mouthful of a name for a motherboard, but it does offer pretty hefty features for the price. You get almost all the features of an average X470 board but at half the price, and it also works with the newest Ryzen 5000-series processors. It leaves you with a significant upgrade path in the future.
The TUF B450M-Plus II uses a 6-phase VRM design for power delivery, which is perfectly suitable for a low-power Ryzen APU. This mATX board also has four DIMM slots, giving you a perfect opportunity to upgrade your memory capacity. Since it uses a B450 chipset, you get access to both CPU and DRAM overclocking functions.
This is a “TUF”-branded Asus motherboard, so it has an all-black PCB with yellow and gray accents all around. The board uses quality components that are made to last longer than other boards. The military-grade chocked deliver clean and steady power to the processor at all times, whilst the proprietary capacitors provide greater temperature tolerance and a longer lifespan. The primary PCIe slot also has reinforced shielding for better durability. According to Asus, the board has “enhanced overvoltage and overcurrent protection.”
Connectivity options on the TUF Gaming B450M-Plus II are quite versatile. The rear I/O consists of a total of six USB ports (three USB 3.2 Type-A, one USB 3.2 Type-C, and two USB 2.0), a Realtek Gigabit LAN port, HDMI 2.0b, DVI-D, and three 3.5mm audio jacks. You will also find a “BIOS Flashback” button that allows for easy BIOS updates without entering the existing BIOS or the operating system.
The TUF B450M-Plus II comes with Asus’ excellent software suite, which includes AI Noise-Cancelling Microphone Software, Aura Sync, Turbo LAN, and more. Overall, this is an exceptional B450 motherboard from every aspect as it covers all the essentials.
|A feature-packed, great value B450 board||Realtek ALC887 leaves a lot to desired in the audio department|
|Decent overclocker||Single M.2 slot|
|Flashy design and excellent build quality|
Frequently Asked Questions (F.A.Q)
Now that you finally have learned about our top five picks for the best motherboard for Ryzen 3 2200G, be sure to check out our answers to a few questions people often ask:
Q1. Which motherboard socket is compatible with AMD Ryzen CPUs?
Every Ryzen processor to this date uses the AM4 socket for its motherboards. However, it’s the chipset that decides the forward and backward compatibility between the CPU generations, even though they all share the same socket.
This will finally change with the release of AMD’s highly-anticipated Zen 4-based 5nm processors in 2022, which is rumored to use the brand-new AM5 socket.
Q2. What’s the best motherboard chipset for the Ryzen 3 2200G?
The answer would have been the X-series chipset if it wasn’t for the Ryzen 3 2200G. Since it’s an entry-level APU, the best and most relevant option for a budget PC builder would be a cheaper AM4 motherboard with a B450 chipset.
If you are familiar with the used market, you can also grab a B350 motherboard at a dirt-cheap price. However, it will significantly limit your upgrade path in the future.
Unless you have a very strict budget to work with, we strongly recommend not to go for an A320 motherboard as it omits CPU overclocking and has fewer expandability options.
Q3. Why didn’t you include newer AM4 motherboards on this list?
Newer AM4 motherboards with A520, B550, and X570 chipsets only support Ryzen 3000-series CPUs and higher SKUs, which is why we didn’t bother to mention them on this list.
The Ryzen 3 2200G is based on the 1st-gen Zen architecture, so it’s compatible with up to B450 and X470 chipset motherboards. The following chipsets also work with Ryzen 3000 (Zen 2) and 5000-series (Zen 3) CPUs and APUs, but they require a BIOS update from the motherboard manufacturer.
Q4. Is there any reason behind recommending faster RAM for the Ryzen 3 2200G?
The Ryzen 3 2200G is an APU with integrated graphics, and it doesn’t have dedicated video memory. Instead, it uses the primary DDR4 system memory as VRAM to load up assets and share the bandwidth between the execution cores and compute units.
Put simply, dual-channel memory kits capable of faster data rates and tighter latencies have a positive impact on the bandwidth-hungry graphics cores of the APU, resulting in higher framerates in games. Similarly, a slower RAM stick running in a single-channel configuration will have negative results.
This is why it’s very important to choose a motherboard that has better memory support and upgradability factor. A B450 motherboard with four DIMM slots is ideal for use with a Ryzen 3 2200G, as you can start with a 16 GB (2 x 8 GB) dual-channel DDR4 memory kit and then get the same kit later down the road to upgrade your overall system RAM capacity.
If you are looking for an affordable yet powerful desktop memory kit, check out the following options:
- Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4 3200MHz C16 (check here)
- Teamgroup T-Force Vulcan Z 16 GB (2 x 8 GB) DDR4 3200 MHz C16 (check here)
- Crucial Ballistix 16 GB (2 x 8 GB) DDR4 3600 MHz CL16 (check here)
This guide contains our roundup of the best motherboards for Ryzen 3 2200G. We hope that our summarized reviews of every board will help you with your purchase decision and build a capable gaming system. You will find links to buy every motherboard on the list above.
If you have any questions regarding this guide, check out the F.A.Q section or leave a comment below. You can also check out the other PC-focused buying guides that we have posted here.