Have To Press The Power Button Multiple Times To Start My Pc?

The power button on a computer can be taken for granted because it rarely breaks down. The desktop computer won’t switch on, which can be irritating and challenging for all computer users to figure out where to begin the repair process. There is a lack of information available on a computer not switching on makes it the most discouraging PC repair issue. Let us know ‘Have To Press The Power Button Multiple Times To Start My Pc?’. 

Have To Press The Power Button Multiple Times To Start My Pc?

Have To Press The Power Button Multiple Times To Start My Pc?

The fact that the computer is not switching on after press the power button multiple times to start my pc, is already a red flag. The most likely issue is that something is improperly plugged in somewhere in the chain between you hitting the power button and power being provided to the components. Other causes include hardware, software, or screen problems.

Reasons and solutions for computer switching on after press the power button multiple times to Start My Pc

Faulty power supply

The common reason for the computer not starting on the first try is the power is cut-off. 

Solution: Test the wall outlet is working and the power switch is on. Check whether the PC power supply is on or off. Also, check the PC power cable is plugged into the outlet and that the PC power cable is plugged into PSU. Additionally, make sure the power cords for the motherboard and CPU are connected. 

After checking the cables and pressing the power button, if you still receive nothing, check to make sure the motherboard has any idle indicator lights, it is indeed getting power. If not, users need a new power supply. 

Inadequate power supply

The issue of the computer switching on after press the power button multiple times to start my pc can be because of a faulty or inadequate power supply. When you give power to the computer, it helps to spin the platters of the hard drive quickly enough to start the computer. If the hard drive doesn’t receive enough power when the computer initially turns on, it won’t be able to rotate platters. After restarting the computer multiple times, it might eventually boot because of the already spinning platters.

Solutions: If the users have installed the new hard drive or additional video card, it is better for your computer to have a power supply with a minimum output of 300 to 350 watts. 

Users can get the power requirements for video cards by searching online. 

Plug the power cord to check if the problem is not due to the power battery. Change the main battery if the computer starts up without issues when plugged in.

Failing battery of laptop computer

A bad battery is another issue where users have to hit the power button multiple times to restart the computer. Like all batteries, laptop batteries have a lifespan and are susceptible to failure when worn out or improperly taken care of. Users will observe overheating, rapid draining, lengthy charging times, or unexpected power problems in a failing battery. 

Solutions: Remove the battery after powering off the computer and unplugging the charger. Release static electrical charges inside the equipment. This can be done by pressing the power button for 15 seconds. Replace the battery of the computer and try to restart it. 

If your laptop boots up normally after taking the battery out then you need to replace the battery. 

Worn-out power button

Users should also check the power button. If it is defective or has bad contact it can cause a problem. A power button can malfunction just like any other piece of hardware. The worn-out power button might not respond to presses on the first try. To get a response, you have to press it repeatedly. Dirt particles can also cause the power button to become stuck and malfunction.

Solutions: Users can solve this problem by cleaning the power button with a piece of microfiber cloth dipped in rubbing alcohol and running a toothpick over the edges. Try restarting the computer. 

You can also unplug the power button from the motherboard and bridge the connecting pins, see PC turns on. 

Software is creating the problem

There are some issues in the software that lead to restarting problems in a computer.

Enabled fast startup feature

There is another culprit of a computer restarting issue is the fast startup or hybrid sleep. This feature makes it possible for a computer to restart more rapidly after a shutdown, is very helpful when a user installs updates and restarting is necessary. With this feature, Windows will enter a state similar to hibernation for quicker startup. Your computer enters a condition that lies in between hibernation and shutdown when users press the power button. It does not shut down actually. 

This feature is helpful but at the same time, it is known to create many power issues, especially in Windows 10 computers as this feature is enabled by default. Another problem is it uses too much hard drive space and leads to prolonging CPU uptime. 

Solutions: The power issue can be solved by disabling this feature, which can be done after following a few easy steps:

  • Disabling this feature is possible by going to the control panel and clicking on the power options. 
  • After choosing the power options select the option from the left side of a panel called the choose what power buttons do. 
  • There you will see the option turn on fast startup (recommended) already check marked.
  • Uncheck it and save the changes. 
  • After saving changes you have disabled the fast startup feature.

If it has not solved the issue there might be another cause of power issues. You can enable this feature again if you want to. From Windows 11 you can disable the fast startup feature by going to System Security and then the power options.

A computer is not passing Power-On Self-Test (POST)

 When a computer is not starting and there is no beeping or is beeping erratically then follow POST troubleshooting steps. It is a process that begins when a computer turns on to ensure that all hardware components of a computer working properly, but before the operating system boots up. 

Solutions: If you experiencing POST errors then disconnect all new hardware, external devices, and drives, check power cords, identify the beep code, and check all cables, fans, etc. 

Unknown issues of hardware and software of a computer

As a computer is a complicated machine, sometimes you can’t find the root cause. In that case, it is better to run a built-in troubleshooter. It will help the user to find corrupt system files or other issues causing power problems.

Solutions: On old Windows computers, go to the settings and then choose to troubleshoot. After that go to the additional troubleshooters. In new Windows computers, scroll down to the power.

A computer will start the process after you press the run troubleshooter button. This process will help you to solve any system software issue automatically. This may also resolve the power button problem. You can also run this program for hardware issues.  

Power Supply Unit is the root cause

The power supply unit in short PSU is an essential part of a computer and if it works improperly can result in issues like power button problems, black and blue screen, random crashes and restarts, overheating, or random screen freeze. An incorrect voltage supply can cause the PSU to malfunction. 

Solutions: Different tests will help you to find whether your computer PSU is causing a power button problem in your PC or not. But before running out tests note that this unit always carries some level of electric current. Tests include the Paperclip test and Swap test. You can look up the procedures of these tests on the internet.

Outdated drivers of a computer

The issue of pressing the power button multiple times to start the computer can also be because of an outdated operating system and related drivers. If have not updated drivers it can also cause glitches and errors. New updates can also cause problems. 

Solutions: You can update drivers and motherboard driver to solve this issue and can also roll back to an old version. 

The hard drive is causing a power issue

A defective hard drive may not cause problems with the power button directly; it can hinder your system’s performance and prevent it from booting up. It can cause damage to files, bad sectors, and crashes and rebooting issues.

Solutions: CHKDSK tool is a built-in Windows tool that allows its users to scan the hard drive. It can resolve minor issues and can also inform about unresolved issues. You can access this tool by typing the cmd in the search bar. You will see the command prompt and the run as administrator. Then choose the CHKDSK after selecting the run as administrator. 

Conclusion

There are several reasons which can lead a user to press the power button multiple times to start his computer from power outlet issues, software problems, the power button itself having issues, hardware issues to outdated drives. Some issues can be resolved by updating drivers, checking wiring and power supply, replacing hardware, and more. The power problem can also be solved by running a built-in troubleshooter tool. 

Frequently asked questions

What to do if the power button on my Mac computer is ineffective? 

If your Mac computer is not turning on then check the power connection, press the power button for 10 seconds, and unplug all external devices, and others. If your computer screen is black then it might be a software issue.

What is the sign that the computer power supply is causing the power button issue?

Even if all other components of a computer are damaged it should turn its fans on and show a power LED light if only its power supply is operational. 

 

Have To Press The Power Button Multiple Times To Start My Pc?

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top