A start-up repair is a system recovery tool in a computer system that is used to mend system-related problems such as missing or faulty files that might hinder the system windows from booting and performing effectively as required. This tool is automatic in that when the system windows fail to start properly, it scrutinizes the system and attempts to solve issues such as corrupted system files and non-valid boot files. Let us know “How Long Does Startup Repair Take Windows 7?”
Many people ask how long a startup repair takes in Windows 7. Usually, a Startup repair should take 15 to 45 minutes. However, sometimes it can take so long. It can even take days, depending on the nature of the problem. So why does it take so long? This is either because the Startup Repair tool cannot function or system windows can’t fix that issue.
However, Startup Repair cannot repair unbootable Windows if the hardware is damaged, if the system has viruses, and if there is a problem installing clean windows or upgrading windows. For example, from Windows 7 to 8. It is good to note that Startup Repair is not a backup tool; hence it cannot help recover lost data or files such as documents.
To prevent computer data loss, one must back up the data. It cannot repair hardware failures such as incompatible memory. This article will discuss how someone can perform a startup repair in Windows 7, how to fix a failed startup repair, how to cancel a startup repair, and how to launch a startup repair.
How is a Windows 7 startup repair performed?
A startup repair tool used to mend system windows by repairing files that might be corrupted or even missing can be done by following these steps:
- Boot the system by pressing any key after ensuring that there are no plugged-in devices such as flash drives or USB storage devices in the computer since these might cause the startup repair to report that there is no problem, yet there may be many issues as damaged files.
- After booting is complete, allow the system window to load all the files that were there temporarily.
- Go to settings and appropriately set up the language, time, currency, keyboard, or input method.
- On the settings menu bar, click the “repair your computer “option, which has the system recovery tools options. One of them is Startup Repair.
- Allow the system recovery to look for windows seven installations from the hard drives in which Windows 7 is running. This takes only a few minutes, and it’s done.
- After the installation process, select the windows seven installation on which the Startup Repair will perform.
- Then, from the system recovery tools options, select Startup Repair.
- Allow the Startup Repair to search for file problems and fix them automatically or suggest a solution that needs confirmation. This is to ensure the proper functioning of Windows
- Allow the Startup Repair attempt to fix the Windows 7 file issues found. Could a person wait until it finishes? Do not interrupt. Note that this step happens if Startup Repair finds any Windows problem.
- Select Finish to restart your computer system, allowing Windows 7 to start normally. Startup repair focuses on correcting some problems that might cause the windows not to start up normally. It is a recovery tool found in the System recovery options menu. It only fixes some issues, for example, files that have been damaged.
NOTE: If the Start Repair didn’t fix the system problem and it does not automatically rerun itself again, these steps should be repeated. Rerun the Startup Repair manually. If it fails to fix the issues completely, try other recovery options such as system restore or a system image recovery if a backup was previously done in the entire computer. You can also do a clean or parallel install of Windows 7.
How to fix a failed startup repair?
A failed startup repair in windows seven may result from two situations.
-
Startup repair stuck
It is a problem that prevents one from accessing any program on a computer and carrying out any repairs. This problem can be solved in several ways; by checking the damaged files using the chkdsk tool or disabling automatic restart.
-
When the startup repair is unable to repair the computer automatically
This happens when the computer has serious damages that cannot be repaired automatically. The following steps will help to solve the problem.
- Run the system file checker by restarting the computer, pressing F8 severally to display the startup option, command in the safe mode option, and restarting your machine.
- The BCD can be rebuilt manually by typing several commands in the command box.
- CMD is another option to repair a failed startup. open it and type some commands; C, dir, etc.
How to cancel the startup repair process in windows 7?
In case the startup process fails, press the power button for five seconds and leave it to turn off. If this doesn’t work, click the option for advanced settings on the notification and boo. At safe mode, at this point restart the machine properly.
How to check if windows 7 is corrupted?
To check if, windows 7 is corrupted follow the following steps;
- Click start.
- Type CMD.
- Select run as an administrator.
- On the UAC, click Yes.
- In the CPW, type SFC and enter.
- When the process is finished, reboot.
Does startup repair delete data?
Repair should not delete any files in the computer. Its function is to mainly just repair, making it a safe tool. In case the files disappear, a factory reset can be done. A USB drive can also be used to secure the files before starting the repair.
How to launch startup repair?
There are cases where the startup repair may not work, if the hardware device is to be blamed, if the user account cannot be accessed, and if a virus influences the system. In this case, the startup repair can be initiated by setting the app in windows as follows;
- Open the settings App.
- Click on Update and security.
- Choose the recovery option.
- Press Restart Now.
- Select troubleshoot, followed by advanced options, then startup repair.
- On completion, select computer reboot.
The startup repair can also be instructed from the desktop;
- Start the computer
- Press the power button.
- Click the shift button continuously, followed by a restart.
- Choose to troubleshoot, followed by advanced options, and startup the repair followed by a reboot.
If there is no recovery disk and the system is not computing, it is possible to create a recovery disc in another PC, provided it is windows 7. This recovery disk has several advantages;
(a) It provides security for the saved data.
(b) Backing up data and information in the disc will ease the management of the data, especially while sorting it out.
(c) It makes data reliable in case data is lost during the startup process.
(d) Maintains high accuracy of data.
(e) Ensures that the performance of the PC has an effect.
(f) Helps in reducing the cost of management.
In the created disk install, the window version and all the tools needed for the startup repair. It is also possible to disable the launch startup repair. Sometimes the process may fail and show an error. It can be ignored or taken care of in the following ways; some commands should be elevated in the prompt command. To avoid such errors, ensure that the computer is always turned off in the right way but not just by pressing the power button.
In conclusion,
Startup repair is an important process for computers in instances of failure. To be successful, one must remove all external storage devices. This ensures that the problem in the window is unexposed in the devices but in the PC, which is to be repaired. If one notices that the computer has a problem, it may stop working or work very slowly. Sometimes an error threat may appear on the screen, and the computer may turn off. Suppose the computer continues to misbehave despite starting the repair. In that case, it should be taken to an expert or returned to the manufacturers if the warrant period has not expired. Otherwise, it is common for a computer to experience some errors which need to be repaired.
Frequently Asked Question
- What to do if the Startup Repair Couldn’t resolve the issue?
Likely, Startup Repair wasn’t able to resolve your issue. The Startup Repair application may restart once the computer continues if it determines this on its own. Follow those instructions to manually perform Startup Repair once more if it doesn’t start automatically, but Windows 7 still gives people trouble. However, suppose a person does have some extra recovery alternatives, such as a System Restore or a System Image Recovery, presuming that they have already backed up your complete machine. In that case, it becomes clear that Startup Repair won’t be able to fix your Windows 7 issue.
