Xbox 360 Wired Controller Keeps Disconnecting From PC

Your Xbox-wired controller continuously disconnecting from your PC can be very annoying, especially when your Xbox-wired controller chooses to act up when you had friends over at your place for some dopamine-filling and pulsating video game. There are fixes for Xbox wired controllers that disconnect from the PC and you would read about these fixes in this article, so you would not be blank when your Xbox wired controllers continuously connect and disconnect from your PC. Let us know “Xbox 360 Wired Controller Keeps Disconnecting From PC”

Xbox 360 Wired Controller Keeps Disconnecting From PC

Xbox 360 wired controller keeps disconnecting from the PC

Your Xbox 360 wired controller is the part of your Microsoft Xbox game console that helps you to select game console options on your PC screen and also to control the characters you have in your Microsoft Xbox video game. Your Xbox 360 wired controller might connect and disconnect repeatedly due to the following reasons a fault with your Xbox 360 wired controller’s connection cable, a problem with your PC’s connection port for Xbox 360 wired controller, internal damage to your Xbox 360 wired controller, a software fault with your PC, a problem with your PC’s hardware. All the causes of your Xbox 360 wired controller’s continuous connection to and disconnection from your PC would be discussed further here.

Xbox 360 wired controller connection wire fault

Your Xbox 360 wired controller might continuously connect and disconnect from your PC if there is damage to the wire that helps your Xbox 360 wired controller to connect to your PC. Your Xbox wired controller’s connection wire keeps your PC connected to your Xbox 360 wired controller by transmitting electric signals between your Xbox wired controller and your PC. If there is a breakage in the wire that connects your Xbox-wired controller to your PC, no matter how slight the breakage in the wire may be, your Xbox-wired controller would keep connecting to and disconnecting from your PC and upend your fun time. The continuous connection and disconnection of your Xbox 360 wired controller in this case is a result of the constant impedance to the current flow in your Xbox 360 wired controller.

A fault in your PC’s Xbox 360 wired controller connection port 

Your Xbox 360 wired controller may be continuously connecting and disconnecting because of a fault with your PC’s dedicated port for connecting your Xbox 360 wired controller cable.  A fault with your PC’s dedicated port for connecting your Xbox 360 wired controller’s cable would make your Xbox 360 wired controller’s connection wire would be sitting in a wobbly manner within your PC’s dedicated port. The wobbliness of your Xbox 360 wired controller connection cable within your PC’s dedicated port would hinder the smooth transmission of electrical signals from your PC to your Xbox 360 wired controller. For this reason, your Xbox 360 wired controller would keep connecting to and disconnecting from your PC.

Internal damage to your Xbox 360 wired controller

Your Xbox 360 wired controller’s continuous disconnection from your PC might be caused by internal damage to your Xbox 360 wired controller. Damages like an electrical surge within your Xbox 360 wired controller, a shaking wire within your Xbox 360 wired controller’s circuit board, and so on can prevent smooth electrical signals transmission from your Xbox 360 wired controller to your PC, and would ultimately result in your Xbox 360 wired controller continuously connecting to and disconnecting from your PC.

A software fault with your Xbox 360 wired controller or your PC

A software fault with your PC can cause your Xbox-wired controller to continuously connect to and disconnect from your PC. Software faults like your system’s OS crashing, the presence of a malicious ware, or a particular software is impeding the smooth running of your PC failing your PC to smoothly transmit electric signals to your Xbox 360 wired controller. The problem might also be a software issue with your Xbox video game console which would stop your Xbox 360 wired controller from working optimally and make your Xbox 360 wired controller continuously connect and disconnect from your PC. 

A problem with your PC RAM or other Hardware

Your Xbox 360 wired controller might be connecting to and disconnecting from your PC because your PC’s RAM or other hardware is malfunctioning. A malfunctioning RAM can slow down your PC and prevent your PC from working in synchrony with your Xbox 360 wired controller. Also, your Xbox 360 wired controller would continuously connect to and disconnect from your PC if your PC’s CPU is not working optimally. 

Solutions to Xbox 360 wired controller continuously connecting and disconnecting from your PC

Your Xbox 360 wired controller continuously disconnecting from your PC is not a problem that is bereft of fixes. Here are viable fixes for your Xbox 360 wired controller continuously connecting to and disconnecting from your PC:

Check the wire that connects your Xbox 360 wired controller to your PC

Your Xbox 360 wired controller may disconnect from your PC because there has been damage to the wire that connects your Xbox 360 wired controller to your PC. Carefully check the wire connecting your Xbox 360 wired controller to your PC, to see if there has been damage to it. Also, consider using another wire to connect your Xbox 360 wired controller to your PC.

Restart your Xbox 360 wired controller

If the cause of your Xbox 360 wired controller’s constant disconnection from your PC is a stress overload, refreshing your Xbox 360 wired controller by switching it off and on again would stop your Xbox 360 wired controller from connecting and disconnecting continuously. To refresh your Xbox 360 wired controller by switching it off and on again:

  • On your Microsoft Xbox game control, press down the “X” button, and keep pressing down your Xbox’s gamepad “X” button for 20 seconds before releasing it.
  • After pressing your Xbox’s pad “X” button for 20 seconds, leave your Xbox game console for five minutes then tap on your Xbox’s console “X’ button again for your Xbox 360 game console to restart.
  • Log in to your Microsoft Xbox account to reconnect your Xbox 360 wired controller back to your Xbox 360 video game console.

Update your Xbox 360 wired controller’s driver through your Xbox 360 device manager

Another way to fix your Xbox 360 wired controller’s disconnection problem is to update your Xbox 360 wired controller’s device driver through your PC device manager. To update your Xbox 360 wired controller’s driver through your PC device manager:

  • In your Microsoft Windows search box, enter “device manager” and open your Microsoft Windows PC device manager application.
  • After you have opened your Microsoft device manager application, search for USB controllers in the list of devices that come up and click on USB controllers.
  • Right-click the “USB device” option and press “update driver”
  • A window with an updated device software automatic search option would pop up, press the option and the process for downloading the latest device driver would take place.

Disable and enable your Xbox 360 wired controller in your Microsoft PC device manager

Disabling and enabling your Xbox 360 wire controller is another viable way to solve Xbox 360 wired controller continuous disconnection problem.

  • Switch off your Xbox 360 wired controller.
  • In your Microsoft PC’s search bar, enter “device manager” and click the device manager application to open it.
  • After opening the Microsoft device manager application, you would see a lot of options including “human interface devices”, and press “human interface devices”.
  • The human interface devices option would expand to a new set of options, right-click on the “game controllers” option and then tap the “disable” option for your Xbox 360 wired controller to be disabled.
  • Shut down your Microsoft PC and switch it back on, then switch your Xbox 360 wired controller. Reconnect your Xbox 360 wired controller to see if the Xbox 360 wired controller disconnection problem persists.

Close the Steam and Oculus Home programs

If after applying all the fixes mentioned in this article, your Xbox 360 wired controller continues to disconnect from your PC, other Microsoft gaming ware or applications might be the cause. These gaming wares have access to your PC’s hardware and they compete with your Xbox 360 wired controller for RAM space, leading to your Xbox 360 wired controller constantly disconnecting from your PC.  First off all close the oculus home and steam applications, and if the problem of your Xbox 360 wired controller disconnection is not solved, do this:

  • Disconnect your Xbox 360 wired controller and enter “task manager” in your PC windows search box to run your task manager application.
  • Click on “steam client bootstrapper”
  • End the steam client bootstrapper process.
  • Now, reconnect your Xbox 360 wired controller back.

Conclusion

Your Xbox 360 wired controller disconnecting from your PC is not an irresolvable problem, but you would be blank if you don’t know the appropriate fix for an Xbox 360 wired controller that keeps disconnecting from your PC.  Apply all the mentioned solutions to Xbox 360 wired controller’s continuous disconnection from your PC and don’t let your Xbox 360 wired controller mess up your fun time playing Microsoft Xbox games.

Xbox 360 Wired Controller Keeps Disconnecting From PC

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top