LG C1 Wall Mount Screw Size

The LG C1 is a popular OLED TV with a sleek and slim design that allows for easy wall mounting. However, finding the right screw size for wall mounting the LG C1 can be a bit confusing. In general, the screw size required for wall mounting the LG C1 will depend on the VESA pattern of the TV, which is a standard pattern used for mounting TVs on walls.

The VESA pattern for the LG C1 is 300mm x 200mm. This means that the TV has four screw holes in a rectangular pattern that are spaced 300mm apart horizontally and 200mm apart vertically. To determine the right screw size for wall mounting the LG C1, you will need to measure the length of the screws and the thread diameter.

Here are the steps to find the right screw size for wall mounting the LG C1:

1. Determine the VESA pattern of the TV: As mentioned, the VESA pattern for the LG C1 is 300mm x 200mm.
2. Measure the depth of the mounting holes: The depth of the mounting holes on the back of the TV will determine the length of the screws needed. Use a ruler or tape measure to measure the depth of the mounting holes.
3. Determine the thread diameter: The thread diameter of the screws is the thickness of the screw. Use a screw gauge or ruler to measure the diameter of the screw threads.
4. Find the right screw size: Once you have determined the VESA pattern, depth of the mounting holes, and thread diameter, you can use a screw size chart to find the right screw size. The most common screw sizes for VESA patterns are M4, M5, M6, and M8. For the LG C1, you will need screws that are M6 in size with a thread pitch of 1.0mm.

It’s important to note that the screw length should be equal to the depth of the mounting hole plus an additional 5mm to allow for the thickness of the wall mount bracket. For example, if the depth of the mounting hole is 10mm, the screw length should be 15mm.

In summary, the screw size required for wall mounting the LG C1 will depend on the VESA pattern, depth of the mounting holes, and thread diameter. For the LG C1, you will need screws that are M6 in size with a thread pitch of 1.0mm and a length equal to the depth of the mounting hole plus an additional 5mm.